Air-to-Air Heat Recovery Unit, with Heat Pump and Water Battery. Floor Installation

Air-to-air heat recovery unit, with gas R-410A heat pump, nominal airflow of 3000 m³/h, dimensions 1510x3750x1360 mm, weight 900 kg, nominal static air pressure 250 Pa, sound pressure at 1 m 75 dBA, three-phase power supply 400 V, heat recovery efficiency 75.6%, heat recovery power 24 kW, compressor power 14.2 kW, total power 38.2 kW, COP 9.3 (outdoor air temperature -10°C with 90% relative humidity and indoor air temperature 22°C with 50% relative humidity), heat recovery efficiency 60.6%, heat recovery power 3.5 kW, compressor power 13.8 kW, total power 17.3 kW, EER 3.8 (outdoor air temperature 32°C with 50% relative humidity and indoor air temperature 26°C with 50% relative humidity), with cross-flow heat exchanger made of aluminum alloy plates, individual aspiration fans with curved blades backward directly coupled to EC Inverter type electronic motors, bypass with belt-driven door actuator for mode change from recovery to free-cooling, aluminum extruded profile structure, RAL 9002 prepainted steel closure panels, 42 mm thick, sandwich type, with special sealing joints and mineral wool insulation, outdoor air intake filter class F7, indoor air return filter class M5, access to fans and air filters through inspection panels, lateral access to filters, evaporator and condenser batteries made of copper and aluminum alloy, rotary EC Inverter type compressor, electrical panel inside the unit and remote control model RCT for ventilation and temperature regulation, for air filter status monitoring, weekly programming and integration with BMS through Modbus communication protocol and RS-485 communication bus, with water battery section, for heating and cooling. Floor installation.