Flat walkable roof, non-ventilated, with fixed pavement, conventional type, for public pedestrian traffic. Asphalt waterproofing with single-layer asphalt sheets

Flat walkable roof, non-ventilated, with fixed pavement, conventional type, with a slope of 1% to 5%, for public pedestrian traffic. FORMATION OF SLOPES: by limatesa encintado, limahoyas and joints with double hollow ceramic brick master and expanded clay layer, poured dry and consolidated on its surface with cement mortar, providing a compressive strength of 1 MPa and a thermal conductivity of 0.087 W/(mK), with a medium thickness of 10 cm; with a regularization layer of industrial cement mortar, M-5, 4 cm thick, rough finish; THERMAL INSULATION: rigid panel of hydrofugated mineral wool; UNDERLAYER SEPARATOR UNDER REINFORCEMENT LAYER: non-woven geotextile composed of polyester fibers united by agujeteado, (150 g/m²); REINFORCEMENT LAYER: cement mortar CEM II/B-P 32,5 N type M-10, 4 cm thick; WATERPROOFING: single-layer, adhered, formed by a modified asphalt sheet with SBS elastomer, LBM(SBS)-40-FP, fully adhered with a blowtorch; UNDERLAYER SEPARATOR UNDER PROTECTION LAYER: non-woven geotextile composed of polyester fibers united by agujeteado, (200 g/m²); PROTECTION LAYER: ceramic tile pavement, 20x20 cm, placed in a thin layer with cement adhesive, C1, without any additional characteristics, gray color, on a regularization layer of industrial cement mortar, M-5, 4 cm thick, joined with improved cement mortar, with reduced water absorption and high abrasion resistance type CG 2 W A, white color, for joints of 2 to 15 mm. Including PVC crucetas