ETICS SYSTEM Propam Aisterm Ceram "MOLINS" EXTERIOR WALL INSULATION SYSTEM. CERAMIC TILES COATING. THIN LAYER INSTALLATION

Exterior wall insulation system, with Propam Aisterm Ceram "MOLINS" system, with DIT nº 609, composed of: rigid polystyrene extruded panel, Propam Aisterm "MOLINS", according to UNE-EN 13164, 60 mm thick and 1250x600 mm, fixed to the support with hydrophobic adhesive mortar Propam Aisterm "MOLINS", grey color and mechanical fixings with expansion anchor and polipropylene screw Propam Aisterm Tacos Fijación Soportes A,B,C "MOLINS"; regularization layer of hydrophobic adhesive mortar Propam Aisterm "MOLINS", grey color, with fibreglass mesh anti-alcalis, Propam Aisterm Malla Fibra Vidrio 160 "MOLINS", white color, 3.5x3.8 mm mesh light, 160 g/m² surface mass and 0.6 mm thickness; additional mechanical fixing of the fibreglass mesh to the support with expansion anchor and polipropylene screw Propam Aisterm Tacos Fijación Soportes A,B,C "MOLINS". Ceramic tiles coating, glazed, polished finish, 200x200x10 mm, medium range, water absorption capacity E<,5%, BIa group, according to UNE-EN 14411. INSTALLATION: in thin layer and with double adhesive cement mortar, C2 TE S2, according to UNE-EN 12004, highly deformable, with reduced sliding and extended open time, Vat Superflex "MOLINS", grey color. JOINTING: with cement mortar, type CG2 W A, according to UNE-EN 13888, with reduced water absorption and high abrasion resistance, Borada Plus "MOLINS", red color, in 3 mm thick joints. Including PVC crucets, Propam Aisterm "MOLINS" aluminium profiles, Propam Aisterm "MOLINS" upper closing profiles, Propam Aisterm "MOLINS" corner profiles, Propam Aisterm "MOLINS" mesh profiles, Propam Aisterm "MOLINS" lateral closing profiles, Propam Aisterm "MOLINS" protection profiles, Betoflex M20 "MOLINS" elastomeric monocomponent sealant and Roundex "MOLINS" polietileno expandido cordón for joint sealing, mermas and roturas.